MG-5 Pronssiksi sorvatut holkit
MG-5 Pronssiksi sorvatut holkit
Marginal Bearing mg-5 massiivipronssista sorvatut holkit vuonna 2010 perustettu itsevoitelevien laakereiden ja holkkien erikoisvalmistaja, Marginal Bearing, joka on omistautunut uusien itsevoitelevien laakerimateriaalien kehittämiseen ja valmistukseen.
◆ Introduction
Machined cast bronze bearings offer technically and economically favorable bearings solutions. It is with high load capability, low weight and good corrosion resistance. MG can offer different types of bronze alloys according to the required life time, service etc. The tolerance is much tighter than wrapped bronze bushes.
◆ Lubricated groove
◆ Technical Data
| Technical Data | ||||||
| MG-5 | MG-5S1 | MG-5S2 | MG-5S3 | MG-5S4 | MG-5S5 | |
| Material designation | CuZn25Al6Mn4Fe3 | CuSn5Pb5Zn5 | CuAl10Ni5Fe5 | CuSn12 | CuSn10Pb10 | CuZn25Al6Mn4Fe3 |
| Density | 8 | 8.9 | 7.8 | 8.9 | 8.9 | 8 |
| Yield Strength N/mm2 | ＞450 | ＞90 | ＞260 | ＞150 | ＞100 | ＞450 |
| Tensile Strength N/mm2 | ＞750 | ＞200 | ＞600 | ＞260 | ＞210 | ＞800 |
| Elongation % | ＞12 | ＞15 | ＞10 | ＞8 | ＞8 | ＞8 |
| Hardness HB | ＞210 | ＞70 | ＞150 | ＞95 | ＞75 | ＞250 |
◆ Standard Size：
Cylindrical Bearing , Flange Bearing, Thrust washer , Plate.
Non-Standard Size：
Cylindrical Bearing , Flange Bearing, Thrust washer , Plate.
anteeksi, nyt ei ole tietoa!
Machined cast bronze bearings offer technically and economically favorable bearings solutions. It is with high load capability, low weight and good corrosion resistance. MG can offer different types of bronze alloys according to the required life time, service etc. The tolerance is much tighter than wrapped bronze bushes.
