-,-,-,-,-,-,-,-,-,-,-,-,MG-2 1020,MG-2 1015,MG-2 1010
Hot Tags: epb-laakerit, Kiina, valmistajat, toimittajat, tehdas, tukkumyynti, räätälöity, osta, hinnasto, hinnasto, varastossa, ilmainen näyte, hydrauliset liukulaakeriholkit, epb-laakerit, filamentilla kierretyt itsevoitelevat laakerit, teräs kuitukangaslaakereilla, marginaaliset pb-holkit, pb-sylinteriholkit
MG-2Y sylinterimäisten holkkien erittely ja toleranssi
◆ Introduction:
MG-2Y can work for a long time without oil in the condition of prelubricated with lubrication indents design. It is widely applied in metallurgy machinery, mining machinery, water conservancy machinery, automobile, building machinery, agriculture machinery, rolling steel industry etc.
◆ Material Structure
1. POM with fiber 0.3~0.5mm
2. Porous bronze 0.2~0.35mm
3. Steel backing 0.4~2.2mm
4. Plated coating: Tin plating 0.005mm or Copper plating 0.008mm
◆Technical Data
| Technical Data | |
| Max.load | Static：250N/mm2 |
| Very low speed：140N/mm | |
| Roatating oscillating： 70N/mm | |
| Max. PV (dry running) | 3N/mm ·m/s |
| Temp. limit | -40℃~+110℃ |
| Friction coenncient | 0.05~0.20 |
| Max. speed | Grease Lubrication: 2m/s |
| Oil continued to >2m/s | |
| Thermal conductivity | 50 W(m·k)-1 |
| Coenncient of thermal expansion | 11×10 ·K |
| Initial pre-lubrication at assembly is strongly recommended | |
Dimension and Parameters
Pyydä tarjous
- Length
-
10 :MG-2 1010
-
15 :MG-2 1015
-
20 :MG-2 1020
-
25 :-
-
30 :-
-
40 :-
-
50 :-
-
60 :-
-
80 :-
-
90 :-
-
95 :-
-
100 :-
-
110 :-
-
120 :-
-
Shaft(f7) (mm) :-
-
Tolerance :10
-
Housing (H7) :-0.022
-
Tolerance :12
-
OD :+0.018
-
Tolerance :12
-
ID After fixed Di,a :+0.065 +0.030
-
Clearance DD :10.108 10.040
-
Wall thick- ness S3 :0.130 0.040
-
Oil hole dL :0.980 0.955
Related product
